Compliance West introduces our Portable & Rugged Hipot Tester, the HT-3500S-RF. It is encased in a shipping enclosure roomy enough for cables or a DVM, with all controls accessible without removing it from the enclosure. This rugged hipot comes with an adjustable ground continuity test in range of 0.08-1.50Ω, and Auto-offset for test leads up to 1.00Ω. Performs 2500V AC or 3500V DC Hipot Test. Neutral/Hot to Ground Leakage current test up to 20mA AC or 5mA DC. Easy to use and connect. Ships complete with cables, manual, and a Calibration Certificate. Made in the USA. Calibration and repair services available. Not sure – contact us!
HT-3500S-RF:
SKU: 00-HT3500S-RFHipot Tester
2500Vac @ 20mA
3500Vdc @ 5mA
Adjustable Ground Continuity
Portable and Rugged!
2500Vac @ 20mA
3500Vdc @ 5mA
Adjustable Ground Continuity
Portable and Rugged!
$2,590.00
Portable Hipot Tester encased in a padded shipping enclosure with all controls accessible without removing it from the enclosure.
Hipot Tester
2500Vac @ 20mA
3500Vdc @ 5mA
Adjustable Ground Continuity
Portable and Rugged!
2500Vac @ 20mA
3500Vdc @ 5mA
Adjustable Ground Continuity
Portable and Rugged!
$2,590.00
Features
- High precision leakage current, duration and ground continuity settings.
- Allows no load setup of leakage current and test dwell times.
- Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
- Leakage currents can be set from 1-20mA AC or 1-5mA DC in 0.1mA increments.
- Dwell times can be set from 1-60 seconds in 1 second increments.
- Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
- Build in a portable case 18.6″ wide x 8.4″ high x 16.3″ deep. 22 lbs. Rugged enough to test manufactured housing.
- Ground continuity check is defeatable for testing two-wire products.
- Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
- Optional J2 and J3 cords allow connection of pigtail power leads.
- Simple test outcome judgement. Green lights mean pass – red lights mean fail. Failing tests sound a buzzer as well.
- Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
- Operation Instructions are printed on the rear panel for easy reference.
- In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
- RED lights and a buzzer leave no question if a failure has occurred.
- Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1S (With 0.1 ohm Ground check Pass/Fail Setup).
